The AXM22001-2A-C is a 2.4GHz 802.11b/g WiFi module board which integrates AX22001 and Airoha AL2230S RF transceiver on board to provide a complete WiFi module solution with various user or host interfaces supported. The AXM22001-2A-C is a surface mountable module with castellated mounting holes which offers smaller-form-factor, lower-cost, pre-calibrated RF front-end and pre-certified WiFi module board to free the user from RF and antenna design tasks and regulatory compliance testing, ultimately providing quicker time to market. The user can design his host board with desired function and interface circuits and assemble it with the AXM22001-2A-C WiFi module board through the castellated mounting

以太网 IC 3-Port 10/100 Switch w/ Transceivers & Frame Buffers

Micrel 以太网交换机, 3端口, LFBGA封装, MII/RMII/SNI接口, 100引脚, 10 Mbit/s, 100 Mbit/s, 3.3 V

以太网控制器, 100 Mbps, IEEE 802.3, 1.7 V, 1.9 V, BGA, 289 引脚

Micrel Semiconductor

Micrel Semiconductor

 KSZ8873FLL的两个PHY单元支持10BASE-T和100BASE-TX。 KSZ8873FLL支持100BASE-FX。

5-Port 10/100 Ethernet Switch with Fiber Support

Microchip's LAN8710A/LAN8710Ai are high-performance, small-footprint, low-power 10BASE-T/100BASE-TX transceivers specifically designed for today's consumer electronics, industrial and enterprise applications. The LAN8710A/LAN8710Ai are the industry's smallest footprint solution with up to 40% lower power consumption than existing Microchip transceivers. The LAN8710A/LAN8710Ai have an integrated voltage regulator and ESD protection components to help reduce Bill of Material (BOM) costs.

Microchip LAN8720A和LAN8720Ai低功耗收发器是10BASE-T/100 Base-TX物理层(PHY)收发器，具有可变I/O电压，符合IEEE 802.3-2005标准。 LAN8720A和LAN8720Ai支持通过标准RMII接口与以太网MAC通信。 每个器件包含一个全双工10-BASE-T/100 Base-TX收发器，支持10Mbps (10BASE-T)和100Mbps (100BASE-TX)运行。 LAN8720A和LAN8720Ai实施自动协商，以自动确定运行的zui佳速度和双工模式。 由于支持HP Auto-MDIX，所以可以使用直连或交叉LAN电缆。 LAN8720A和LAN8720Ai支持IEEE 802.3-2005兼容功能和供应商特定寄存器功能。

High-Performance Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX and Industrial Temperature Support

Microchip LAN9500/LAN9500i/LAN9500A/LAN9500Ai USB 2.0 to 10/100以太网控制器数据手册

The KSZ8001 is a 10BASE-T/100BASE-TX/100BASE-FX Physical Layer Transceiver, operating the core at 1.8 volts to meet low voltage and low power requirements. 

The solution provides MII/RMII/SMII interfaces to transmit and receive data. A unique mixed-signal design extends signaling distance while reducing power consumption. HP Auto MDI/MDI-X provides the most robust solution for eliminating the need to differentiate between crossover and straight-through cables.

The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver, which provides MII/RMII/SMII interfaces to transmit and receive data. A unique mixed signal design extends signaling distance while reducing power consumption. HP Auto MDI/MDI-X provides the most robust solution for eliminating the need to differentiate between crossover and straight-through cables. The KSZ8041 represents a new level of features and performance and is an ideal choice of physical layer transceiver for 10Base-T/100Base-TX applications

The KSZ8051 is an AEC-Q100 standard qualified single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for automotive applications. 

The KSZ8051 is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and by integrating a low-noise regulator to supply the 1.2V core. The KSZ8051MNLU/V offers the Media Independent Interface (MII) and the KSZ8051RNLUB-VAO offers the Reduced Media Independent Interface (RMII) for direct connection with MII/RMII-compliant Ethernet MAC processors and switches. A 25MHz crystal is used to generate all required clocks, including the 50MHz RMII reference clock output for the KSZ8051RNLUB-VAO

The KSZ8061 is a family of single-chip 10Base-T/100Base-TX Ethernet physical layer transceivers for transmission and reception of data over unshielded twisted pair (UTP) cable.  The KSZ8061 features Quiet-WIRE® internal filtering to reduce line emissions.  It is ideal for applications, such as automotive or industrial networks, where stringent radiated emission limits need to be met.  Quiet-WIRE can use low-cost unshielded cable, where previously only shielded cable solutions were possible.  The KSZ8061 also features enhanced immunity to environmental EM noise.

The KSZ8061MNx offers the Media Independent Interface (MII) for direct connection with MII-compliant Ethernet MAC processors and switches.  The KSZ8061RNx features a Reduced Media Independent Interface (RMII) for direct connection with RMII-compliant Ethernet MAC processors and switches.  The KSZ8061RNB generates a 50MHz RMII reference clock for use by the connected MAC device.  In contrast, the KSZ8061RND receives the 50MHz RMII reference clock as an inpu

The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. 

The KSZ8081RNx offers the Reduced Media Independent Interface (RMII) for direct connection to RMII-compliant MACs in Ethernet processors and switches. As the power-up default, the KSZ8081RNA uses a 25MHz crystal to generate all required clocks, including the 50MHz RMII reference clock output for the MAC. The KSZ8081RND is the version that takes in the 50MHz RMII reference clock as the power-up default.   

The KSZ8081MLX and KSZ8081MNX offer the Media Independent Interface (MII) for direct connection with MII-compliant Ethernet MAC processors and switches. A 25MHz crystal is used to generate all required clocks

The KSZ8091 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8091 is a highly-integrated PHY solution. 

The KSZ8091MNX and KSZ8091MLX offer the Media Independent Interface (MII), while the the KSZ8091RNx offer the Reduced Media Independent Interface (RMII) for direct connection with MII/RMII-compliant Ethernet MAC processors and switches

Operating at 2.5 volts to meet low voltage and low power requirements, the KSZ8721 is a 10BaseT/100BaseTX/FX Physical Layer Transceiver, which provides an MII to transmit and receive data. 

It contains the 10BaseT Physical Medium Attachment (PMA), Physical Medium Dependent (PMD), and Physical Coding Sub-layer (PCS) functions. Moreover, the KSZ8721 has on-chip 10BaseT output filtering, which eliminates the need for external filters and allows a single set of line magnetics to be used to meet requirements for both 100BaseTX and 10BaseT

The Microchip LAN8187/LAN8187i is a low-power industrial temperature (LAN8187i), variable I/O voltage, Ethernet Transceiver (PHY) with HP Auto-MDIX for high-performance embedded Ethernet applications. The LAN8187/LAN8187i can be configured to operate on a single 3.3V supply utilizing an integrated 3.3V to 1.8V linear regulator. An option is available to disable the linear regulator to optimize system designs that have a 1.8V power plane available