W6100 is a hardwired Internet controller chip supporting IPv4/IPv6 dual stack by adding IPv6 functions on the basis of WIZnet’s patented hardwired TCP/IP core technology. W6100 supports TCP/IP protocols such as TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, ARP and PPPoE. W6100 also includes 10Base-T / 10Base-Te / 100Base-TX Ethernet PHY and Ethernet MAC Controller which makes it suitable for embedded internet-enabled devices.

W5100S is an embedded Ethernet controller designed as a full hardwired TCP / IP with WIZnet technology. W5100S provides internet connectivity to your embedded system by using SPI (Serial Peripheral Interface) or Parallel System BUS.

SPI and Parallel System BUS provide easy connection via external MCU to W5100S.The clock speed of W5100S SPI supports upto 70MHz and the Parallel System Bus supports higher speed network communication than SPI.

The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier internet connection for embedded systems using SPI (Serial Peripheral Interface).

W5500 suits users in need of stable internet connectivity best, using a single chip to implement TCP/IP Stack, 10/100 Ethernet MAC and PHY. Hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE, …, which has been proven through various applications over many years. W5500 uses a 32Kbytes internal buffer as its data communication memory.

The W5300 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier internet connection for embedded systems that required high network performance.

W5300 suits users in need of stable internet connectivity best, using a single chip to implement TCP/IP Stack, 10/100 Ethernet MAC and PHY. Hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE, …, which has been proven through various applications over many years. W5300 uses a 128Kbytes internal buffer as its data communication memory.

The W5200 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier Internet connection for embedded systems.

W5200 suits users in need of stable Internet connectivity best, using a single chip to implement TCP/IP Stack, 10/100 Ethernet MAC and PHY. Hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE, …, which has been proven through various applications over many years. W5200 uses a 32Kbytes internal buffer as its data communication memory.

The W5100 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier Internet connection for embedded systems.

W5100 suits users in need of stable Internet connectivity best, using a single chip to implement TCP/IP Stack, 10/100 Ethernet MAC and PHY. Hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE, …, which has been proven through various applications over many years. W5100 uses a 16ytes internal buffer as its data communication memory.

The W3150A+ chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier Internet connection for embedded systems.

W3150A+ suits users in need of stable Internet connectivity best, using a single chip to implement TCP/IP Stack & 10/100 Ethernet MAC . Hardwired TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE, …, which has been proven through various applications over many years. W3150A+ uses a 16Kbytes internal buffer as its data communication memory.

Alaska M Multi-Gigabit Ethernet PHYs

An octal-port Multi-Gigabit Ethernet Transceiver compatible with both IEEE 802.3bz standard and NBASE-T Alliance specification for 2.5 Gbps and 5 Gbps operation over Cat5e cables

The Marvell® Alaska® 88E3015, 88E3016, and 88E3018 are Marvell’s fourth-generation DSP-based physical layer (PHY) transceivers for Fast Ethernet (FE) applications. The devices contain all the active circuitry required to convert data streams to and from a Media Access Controller (MAC) and to and from the physical media. The 88E3015, 88E3016, and 88E3018 devices incorporate IEEE 802.3u auto-negotiation, supporting both 100BASE-TX and 10BASE-T networks over twisted-pair cable in full-duplex or half-duplex mode

The Marvell® Alaska® 88E3015, 88E3016, and 88E3018 are Marvell’s fourth-generation DSP-based physical layer (PHY) transceivers for Fast Ethernet (FE) applications. The devices contain all the active circuitry required to convert data streams to and from a Media Access Controller (MAC) and to and from the physical media. The 88E3015, 88E3016, and 88E3018 devices incorporate IEEE 802.3u auto-negotiation, supporting both 100BASE-TX and 10BASE-T networks over twisted-pair cable in full-duplex or half-duplex mode

The Marvell® Alaska® 88E3015, 88E3016, and 88E3018 are Marvell’s fourth-generation DSP-based physical layer (PHY) transceivers for Fast Ethernet (FE) applications. The devices contain all the active circuitry required to convert data streams to and from a Media Access Controller (MAC) and to and from the physical media. The 88E3015, 88E3016, and 88E3018 devices incorporate IEEE 802.3u auto-negotiation, supporting both 100BASE-TX and 10BASE-T networks over twisted-pair cable in full-duplex or half-duplex mode

Multi-rate connectivity supporting 10Gbps/5Gbps/2.5Gbps/1Gbps/100Mbps Ethernet speeds

Multi-rate connectivity supporting 10Gbps/5Gbps/2.5Gbps/1Gbps/100Mbps Ethernet speeds

Multi-rate connectivity supporting 10Gbps/5Gbps/2.5Gbps/1Gbps/100Mbps Ethernet speeds

Multi-rate connectivity supporting 10Gbps/5Gbps/2.5Gbps/1Gbps/100Mbps Ethernet speeds

Multi-rate connectivity supporting 10Gbps/5Gbps/2.5Gbps/1Gbps/100Mbps Ethernet speeds

2.5GBASE-T Transceiver

2.5GBASE-T Transceiver

10GBASE-T Transceiver